Skip to content
Hire Mike

Troubleshooting & FAQ

Need a hand? Start here for quick answers and practical steps to get back on track. If you’re applying for a role, visit Candidate quick fixes.

Account & sign-in

I can't sign in — "Your email address hasn't been verified yet." Click Resend verification email on the sign-in page and use the link (valid 1 hour). Once your address is confirmed, you can sign in and continue.

I signed up but no verification email arrived. Check whether you already have an account with that address — signing up a second time won't send a verification email. Look for a "You already have a HireMike account" email instead, and sign in (or reset your password) rather than registering again. If your account exists but was never verified, signing up again re-sends the verification link.

My password is rejected at sign-up. Choose a unique password with at least 12 characters. A longer passphrase is a good option. If HireMike flags a password that appeared in a known data breach, choose a different one.

I forgot my password. Click Forgot your password? on the sign-in page and enter your email — you'll get a reset link (valid for 1 hour). Resetting signs you out on every other device. New passwords follow the usual rules: at least 12 characters, breached passwords rejected. Still signed in somewhere? You can also change it under Account → Security.

I'm signed in but see "No account found". Your login isn't attached to a company account — usually you signed up fresh instead of accepting a team invitation. If you already have a pending invite, this page shows an Accept invite button — use it. Otherwise ask an owner or admin to invite you from Account → Users, then open the invitation email. Accept with the same email address that was invited.

A teammate's invitation "expired". Invites last 7 days. Send a new one from Account → Users.

HireMike asks for a sign-in code and I can't find the email. The subject is "Your HireMike sign-in code" and it goes to your account email. Check your spam folder, then click Send another code. Each code lasts 10 minutes. If the page says "Challenge expired?", click Sign in again and start over.

I've lost my authenticator app. Use the Email tab on the code page. Every account with two-factor keeps email codes on, so that tab always works. The Backup code tab takes one of the codes you saved at setup, and each code works once. Once you're back in, remove the old app and add a new one under Account → Security.

Jobs & publishing

Publish answers "Add at least one interview question before publishing — the AI needs questions to ask." The 🚀 Publish job button stays active — the reason appears on the page. AI-mode jobs need at least one interview question. Add one, or switch the job to human-led if you will interview personally.

Publishing fails asking for scoring criteria. Jobs that use AI CV screening or AI interviews need at least one named scoring criterion. Human-led jobs with AI CV screening off can omit criteria.

I need to change scoring criteria on a published job. You can. Edit them on the Settings tab and save — HireMike asks you to confirm first. New criteria apply only to candidates screened from then on. Anyone already screened keeps the score and the decision they were given, so early and late applicants end up measured on different yardsticks. Change the criteria only when the first set was plainly wrong. Title, description, knockout questions and interview questions are editable on a live job too.

Job import fails ("Enter details manually instead"). The URL wasn't recognisably a job ad, the site blocked automated access, or it timed out. Paste the ad text into the from-scratch form instead. For supported sites such as Seek, Indeed and CareerOne, paste the ad's own link rather than a search page. A supported site can still block access to a particular ad. "Too many imports" means a rate limit — wait a minute.

Where do I post the job to job boards? HireMike doesn't syndicate ads. Copy your public application link (Copy link on the job) and paste it wherever you advertise.

Can I preview my application page before I publish? Yes — Applicant preview on the create form and Settings → Job Ad shows your branding and the ad, including unsaved wording. It does not save, publish or submit an application. Publishing creates the shareable page; open it from the Job link: row. To try the AI interview before publishing, use Try this interview under AI Interview. Details.

Save or Publish is blocked by question or criteria issues. Open the tab with the issue badge and read the message beneath each highlighted field. Checks cover the complete set and the job details, so changing the description can require a new review. With AI CV screening on, criteria must be assessable from CV evidence. If checking is unavailable, your unsaved edits remain; use Retry. Checking does not charge your wallet. Details.

I'm abandoning a role without hiring — how do I wrap it up kindly? Reject the remaining candidates first, then Close job, if you want everyone to get an outcome email. Closing alone does not notify everyone. HireMike does reject and email candidates awaiting CV review, including held invitations. Other candidates can keep seeing their previous status. Bulk rejection is available during Complete hire, and for selected candidates in Awaiting your review.

How do I edit my company tagline or website? On the Company page in the sidebar — along with your company name, logo, brand colour, and contact email. (The scheduling timezone is editable under Calendar → Availability.)

When Apply by Email is available, turn it on from the Company page, then forward those emails to your company address. Each candidate confirms by email before they reach your board. See Apply by Email — your company address.

I forwarded an application and nothing appeared on my board

Check these causes first:

  1. The mailbox you forwarded from is not registered. Add it under Forward from these mailboxes on the Company page. We deliberately never email an applicant on behalf of a mailbox you have not listed.
  2. The candidate has not confirmed yet. Forwarded applications wait for the applicant to confirm their address and answer your screening questions. The Company page shows how many are waiting. A job's Settings page shows only the ones for that role.
  3. The job is closed, or Apply by Email is off for it. The address keeps existing after a job closes, so a forwarding rule left running will keep sending to it; the sender gets an automatic reply saying the role is closed.

Someone forwarded an application and got an automatic reply

That is HireMike telling the sender why it could not accept it — an unregistered mailbox, a closed role, or no readable CV in the message. The applicant is never contacted in those cases, and nothing is added to your pipeline.

If the email never appears in company settings, HireMike may still be retrying a processing failure. Contact support if it stays missing. Include when you forwarded it and the address you used.

Screening & candidates

A candidate says the confirmation code never arrived. Ask them to check spam first, then press Resend code (available a minute after the first). Codes expire after 10 minutes and at most 5 go to one address per hour, so someone who has been pressing the button repeatedly may need to wait before the next one sends. If nothing arrives for anyone across several jobs, the email pipeline itself is down — see below.

Nobody can submit an application at all. If candidates across several roles cannot receive their email confirmation code, contact HireMike support. Include the role and the approximate time of the problem so we can investigate and help applications continue.

Why do candidates confirm their email? A quick check helps make sure your updates reach them, from their application confirmation to an interview invitation or offer. How candidates apply explains the steps.

A good candidate was rejected by screening. You have a 2-hour window before the rejection email sends: open the job's Rejected view and hit Cancel on the pending rejection. After the email has gone, use Re-invite instead. See CV screening.

A candidate has been stuck in "Screening" for ages. Screening normally takes under a minute; HireMike checks waiting applications every 15 minutes and retries screening automatically. If a candidate is stuck far longer, their CV may be unreadable — check their profile for a "CV could not be processed" notice (they'll have been emailed a re-upload link automatically).

A candidate's card says "Can't reach". Their mail server refused one of our emails permanently — usually a typing error in the address. Open the candidate, go to History, and press Fix address on the red line. HireMike sends the bounced email again and starts their deadline again from now. See Managing candidates.

Why is the Resend invitation button greyed out? Update the address using Fix address in History. HireMike then sends the message again, helping your candidate get back on track.

Why can't candidates see their scores? Candidates get a clear progress update on their status page, while scores, assessments, notes, and flags are employer-only.

Can I export candidates / download the original CV? Yes to both. Export CSV on the candidates page downloads the full pipeline (names, stages, scores, offer responses) as a spreadsheet, and Download original CV on a candidate's CV tab fetches the file exactly as they uploaded it.

I rejected someone with a delayed email and changed my mind. Rejected view → their row shows "Rejection email pending" → Cancel. They're restored, and no email is sent.

Interviews

My candidate says their interview link doesn't work. Depends on the message they see:

  • "Your interview window has passed" — scheduled interviews accept joins only 5 minutes early to 15 minutes late. A missed window triggers an automatic rebooking email (first miss only).
  • "You've already completed this interview" — completed interviews can't be retaken; their results are on your dashboard.
  • "This interview invitation has expired" — legacy on-demand interview invitations can expire and lead to automatic rejection; use Re-invite from Rejected for another attempt. Scheduled booking invitations have a separate 7-day window: expiry stops booking but does not reject the candidate. You receive an alert. Use Resend invitation on their profile to restore booking access; their old email cannot bypass expiry. See Interview scheduling.
  • "We couldn't connect you to the interview room" — a network problem at the candidate's end (restrictive Wi-Fi, VPN, firewall); have them retry, switch networks, or change browsers.
  • "This interview is now being arranged directly by the employer" — the job is in human-led mode; book them via their profile.
  • "This interview attempt has ended and cannot be restarted" — they started the interview, dropped out, and did not come back inside 15 minutes. Reject them, then use Re-invite in the Rejected view to send a fresh link. Resend invitation on their profile does not help: it emails the same dead link.
  • "This interview link has been opened too many times without the interview starting" — they opened the link and left the practice run three times without pressing Start interview (a tab closed mid-setup counts). Nothing was recorded and no attempt was spent. Same fix: reject, then Re-invite — a fresh invitation opens a fresh allowance.

The candidate sees "Our interviewer encountered an audio problem". If Try again appears, HireMike confirmed an interviewer audio-service problem before any candidate answer was captured. They can start another practice run with the same invitation within 30 minutes, up to two replacement attempts. This differs from reconnecting to the same interview. If no retry is offered, follow the screen and contact the hiring team or support. Details.

A candidate's interview dropped mid-way. Are they (or am I) penalised? Incomplete interviews are not billed. HireMike keeps saved answers and interruption history. While the session remains open, the candidate normally has 15 minutes after each drop to rejoin through the same link, within the overall 45-minute limit. If they rejoin and complete, the interview is charged once. Once the session is closed, reject them, then use Re-invite in Rejected for another attempt. Confirming End closes the attempt; it is not a pause.

The interviewer is a still picture, or a blank box. The candidate's browser cannot draw the animated interviewer. The animation needs a browser graphics feature called WebGL, and a setting, an extension, a company policy or a graphics problem can turn it off. The interview is not affected: the conversation, the recording and the assessment work as normal.

  • Before the interview: the system check shows Animated interviewer with a warning. The candidate can still press Start. In the interview they see a still picture of the interviewer, which glows while the interviewer speaks.
  • During the interview: if the browser's graphics fail after the animation starts, the still picture replaces the animation for the rest of the interview. The candidate does not need to do anything, and the interview continues.

To get the animation back, the candidate opens How to turn animation back on under the warning, follows the step for their browser, and presses Check again:

  • Chrome: Settings → System → turn on Use graphics acceleration when available, then reopen the page. In Edge, the same switch is called Use hardware acceleration when available.
  • Firefox: type about:config in the address bar, search for webgl.disabled, and make sure it is false.
  • iPhone or iPad with Lockdown Mode: Settings → Privacy & Security → Lockdown Mode → Configure Web Browsing → Excluded Safari Websites, and add the site. On a Mac: Safari → Settings → Websites → Lockdown Mode.
  • Any browser: try a private or incognito window. If the animation works there, a browser extension blocks it.
  • After a graphics crash: Chrome stops 3D graphics for a site for about two minutes. Wait, then press Check again.
  • Work-managed computer: the organisation may have set this. Use a personal device, or continue.
  • If none of these applies, update the browser or the graphics drivers.

If the system check says "This browser can't show the animated interviewer", the browser has no support for the animation. The candidate can continue with the still picture, or open the link in Chrome, Edge, Safari or Firefox.

No interview recording on the profile. The transcript and assessment still appear if the interview completed; occasionally a recording is unavailable ("Recording not available for this interview"). Very old interviews may predate the consent system, which the profile notes explicitly.

The recording has no chapters or event markers. The player needs reliable timing for both the recording and the events. Older interviews and recordings with unverified timing remain playable without markers. The transcript may still be available. Missing markers are not evidence that the candidate had no connection or audio problems.

There is no Skip to rejoin button during a connection gap. The player offers it only when a matching return was recorded. Without that return, it shows No recorded return is available. An audio-recovery pause is separate from a connection gap and ends only when working audio is confirmed.

Do I need to connect my calendar for AI interviews? No. AI interviews run on HireMike's managed availability, 7 days a week. Your calendar matters only for interviews you book yourself (Calendar & availability).

Candidates booking with me see no available times. Set your weekly hours under Calendar → Availability and check the timezone. Candidates see those hours, minus the times you already have HireMike interviews booked. Busy events on a connected calendar are not consulted. Also check the job's human booking notice, which can override Company → Human interview booking. An expired booking invitation needs to be sent again by you.

Offers & hiring

The candidate says the offer email has no salary in it. Every offer email sets out the terms as a summary table — position, employment type, remuneration, hours, location and start date. Open the Offer tab on their profile: Terms as sent shows what went out. An old offer may answer "This offer predates stored terms, so only the email itself has them." Use Amend offer to send the terms again with a new deadline. Details.

The candidate accepted verbally — the dashboard still says pending. Use Offer accepted on their profile. They move the same way as through the link, but HireMike sends them no confirmation email — tell them yourself. Then Complete hire.

"Complete hire" is asking me to type a number. That's the bulk-rejection safeguard: you're about to send "position filled" emails to that many remaining candidates. Type the number to confirm, or untick Send rejection emails to remaining candidates to skip.

A candidate asked a question — where do I answer it? Offer questions land on the Questions page in the sidebar. Click Answer, type your answer, then click Send answer. HireMike emails it under your company name — see Answering candidate questions. A question asked during an AI interview is different: it reaches you by email, and you reply yourself.

Billing

I'm told to top up when I try to invite a candidate to an interview. Your balance reached $0, so new AI interviews (and new CV screening) are paused. Your existing candidates stay fully accessible — only starting new billable work is held. Top up on Billing — the minimum is US$10 and the maximum is US$5,000 — and add enough to bring the total balance above $0. Screening resumes automatically after payment, usually within ten minutes.

Why is my balance slightly negative? Charges land when work completes, so in-flight interviews can push a few dollars past zero. That is expected. At $0 or below the account pauses until you top up, and the shortfall settles out of that top-up. A live coupon keeps the account active, so with a partial coupon the balance can fall further below zero until the coupon ends.

Was I charged for an interview that never happened? No — only completed interviews (ones that produced an assessment) bill. Check Billing if in doubt.

How do I get a tax invoice? For a manual top-up through Stripe Checkout, open Billing → Overview → Payments & receipts → View invoice. Automatic top-ups show View receipt instead; ask support if you need a tax invoice for one. The monthly document under Usage reports is a usage record, not a tax invoice. Details.

Can I get a refund? Unspent paid funds are refundable — email support and we arrange it. Promo credit is not. See Refunds.

Help in the dashboard

Use the help chat bubble, when it appears, to ask how HireMike works. It answers from this Help Centre. Check important steps against the linked guide. If the bubble is absent or cannot answer, contact HireMike support.

The dashboard help bubble is hosted by an external support service. It can receive your signed-in name and email so support can identify you, along with what you type. Keep candidate CVs, interview details and other private hiring information out of general help questions. For the help tool in a connected AI app, see AI apps & access tokens; that path does not automatically send your name or email.

Known limitations

A few helpful details when choosing how to use HireMike:

  • Candidates can read the conversation on the completed interview screen. They cannot reopen a completed interview or view its recording and assessment.
  • Interviews are spoken conversations in the browser — the microphone is required and the camera is optional. There is no text/chat-based interview alternative.
  • Email only — no SMS notifications or reminders.
  • Invitation emails send without a per-send preview (offer and rejection dialogs do have a Preview email button; invitation wording is controlled by your templates under Account → Communications).

Related: For candidates · Glossary · Help Centre index