Skip to content
Hire Mike

Creating a job

Turn your job description into a clear, welcoming application experience. HireMike helps you draft screening questions, choose what matters most and prepare an interview that gives every candidate a consistent starting point.

The Jobs page

Click Jobs in the sidebar. Every job appears with its title, the number of applications, its creation date, and a status badge:

Badge Meaning
draft Being set up. Not visible to candidates. Fully editable.
published Live and accepting applications.
closed Closed to new applications. Settings are read-only. Candidate data remains subject to your data retention period.

Click a job to open it. Drafts (and jobs with no applications yet) open on the Settings tab; active jobs open on the Candidates board. Two tabs — Candidates and Settings — switch between them. Delete a draft you no longer want from the Settings tab — see Deleting a draft.

Create a new job

Click Create job (top right of the Jobs page). You have two starting points:

Option A — Start from scratch

  1. Enter a Job title (e.g. "Customer Support Representative") and a Job description. Both are required.
  2. The description matters more than you might think: it's what the AI uses to generate your screening questions, scoring criteria, and interview questions — and it's what candidates read on your application page. Include responsibilities, must-have requirements, and anything genuinely disqualifying (location, licence, working rights).
  3. The description is a formatting editor. Use the toolbar to add headings, bulleted and numbered lists, bold and italic text, and links. Candidates see exactly the formatting you apply, so break a long ad into sections ("Responsibilities", "What we're looking for") and use bullets for requirements — it is far easier to scan than a wall of text. Undo and redo are in the toolbar too. The limit is 50,000 characters, which is far more than any real job ad.
  4. Click Create draft. Your new draft opens on its Settings page.

An Applicant preview shows your company branding, job title and formatted description as you write, including unsaved edits. On wide screens it sits beside the editor; on narrower screens it appears below it. It previews the job ad only — screening questions and application submission are not included, and previewing does not save or publish anything.

Hover over the company header, or focus it and press Enter, to see where branding is managed. On touch screens, tap the header. Edit company branding opens Company. If you have unsaved job edits, choose Stay here to save them first or Leave without saving to discard them.

Option B — Import from a job ad

Already have the role advertised elsewhere? Paste the ad's URL and HireMike reads it for you.

  1. Choose Import from a job ad and paste the Job ad URL (any public https://… page). HireMike supports imports from Seek, Indeed and CareerOne, although individual ads may be unavailable or block automated access — paste the ad's own link (on Seek it has /job/… or jobId= in it), not a search results page with the ad in a side panel. One site can't be read at all: Workforce Australia never hands over its ad text. HireMike tells you straight away, so enter those roles manually.
  2. Click Import job. You'll watch four steps: Requesting the page → Parsing the content → Extracting job details → Generating your job. Most imports finish in under a minute. If a job board is slow, HireMike says so on screen and keeps waiting, for up to five minutes in all. Cancel stops the import and takes you back to the URL box.
  3. When it's done you land on a fully drafted job — title, description, knockout questions, scoring criteria, and interview questions, all pulled from the ad, minus company-specific boilerplate. The description arrives already formatted, with headings and bullet lists where the original ad had them. Review and edit everything before publishing. If the questions and criteria don't come through, you still get the title and description — use Generate with AI to fill in the rest.

If the import can't finish — the page isn't a job ad, the site blocks robots, or it times out — you'll be offered "Enter details manually instead", which drops you into the from-scratch form. When another attempt could work, such as a site that didn't answer in time, a Try again link appears beside it. There's also a per-account rate limit on imports; if you hit "Too many imports", wait a minute and retry.

Generate the configuration with AI

Start with your job description and let HireMike help with the first draft.

  1. On Settings → Job Ad, enter your title and description.
  2. Under Questions and criteria, click Generate with AI.
  3. Review the suggested questions and criteria. A success message confirms when they have been saved.
  4. Use the count links to open each section and make it your own.

HireMike suggests up to four knockout questions, typically four to six scoring criteria, and one to five interview questions. A role with no clear yes/no requirements may need no knockout questions at all.

Your title can be up to 255 characters and your description up to 50,000 characters. If the generation button is unavailable, hover over it or focus it to see what needs attention.

Updating an existing set

After you change the description, Regenerate with AI can prepare a fresh set. Changing only the title or questions does not enable regeneration. If you return the description to its previous wording, the button becomes unavailable again.

Regeneration replaces and saves all three sections, including unsaved changes to those lists, so HireMike asks you to confirm first. Choose Cancel to keep what you have.

On a published job, generation uses the title and description currently in your editor but saves only the questions and criteria. Your ad wording stays as published until you choose Save changes. Existing screening results are kept, and interviews already underway continue with their original questions. Closed jobs remain available for reference rather than further generation.

Knockout questions

Open Knockout Questions to choose the essential requirements candidates answer before applying. These yes/no questions help you focus on applicants who meet the role’s basics, at no screening cost.

  • Write one clear requirement per question, such as a necessary licence or shift availability.
  • Choose Required answer to continue: Yes or No.
  • Use Add or Remove to adjust the set. You can also leave it empty.

You can add up to 25 questions, with 1,000 characters or fewer in each. Check the required answer carefully. For example, requiring No for “Are you unavailable for Saturday shifts?” makes sense when Saturday availability is essential.

Tip: Use knockout questions for clear essentials. If you’d like to weigh up a strength or preference, a scoring criterion gives you more flexibility.

Getting your questions ready

HireMike checks changed questions against your job description and shows suggestions or issues beside the relevant question. It also highlights repeated requirements or conflicting answers. You can keep editing while the check runs.

If something needs attention, saving opens this tab and takes you to the first issue. Your changes stay in place, so you can make the correction and try again. If a check is temporarily unavailable, choose Retry.

Checks also run when relevant job details change and before publishing. They do not save your work or charge your wallet. Take a moment to review the wording yourself too; the checks are a writing aid, rather than a legal compliance review.

Generated and imported questions follow the same checks. If an import needs more work, you still keep the useful job draft and can add or regenerate questions in Settings.

You can edit knockout questions after publishing. New applicants use the updated questions; people who have already applied keep their original result.

Scoring criteria

Open CV Screening and choose what a strong application looks like for your role. The same criteria guide CV screening and AI interview assessments.

Each criterion has three parts:

  • Name — a short, distinct label, such as “Customer service experience”.
  • Description — helpful detail about the evidence you’d like to see. You can leave this blank when the name is clear enough.
  • Importance — choose Low, Medium, High or Very high using the slider. Higher importance gives that criterion more influence on the overall score.

For example, “2+ years in a customer-facing role, ideally phone or live-chat support” gives the AI more direction than “Experience”.

Each name needs to be unique, including when capitals or extra spaces differ. You can have up to 50 criteria, with names up to 200 characters and descriptions up to 2,000 characters.

Criteria work together: a strong result in one area can balance a weaker result elsewhere. Use knockout questions for essentials that every applicant needs to meet.

At least one criterion is needed for AI CV screening or AI interviews. If you run interviews yourself and turn off AI CV screening, you can leave criteria empty.

Checking your scoring criteria

HireMike helps you keep criteria clear, relevant and distinct. When you edit a name or description, or finish adjusting importance, it checks the set against the role and shows any guidance beneath the affected field.

If AI CV screening is on, choose evidence that a CV can reasonably show: skills, qualifications, experience or examples of work. For instance, customer-facing experience can support communication skills, while how someone speaks is better explored in an interview. To use interview-only criteria, turn off AI CV screening.

Preferred skills are welcome too; a criterion does not have to be essential. Describe useful work behaviours rather than an undefined “culture fit”, and give overlapping criteria separate purposes.

When a check needs attention, CV Screening shows an issue badge. Saving takes you to the relevant field without losing your other edits. If checking is unavailable, use Retry. Checks do not rewrite your criteria, change importance or alter your pass mark.

You can update criteria on a published job after confirming the change. Earlier scores and screening decisions stay as they were, so it’s helpful to settle your priorities before publishing. See CV screening for the available screening and review options.

Interview questions

Open AI Interview to shape the conversation candidates will have with your AI interviewer.

  • Choose one to five main questions, each up to 400 characters.
  • Start with an approachable question, then explore the experience that matters most for the role.
  • Ask open questions, such as “Tell me about a time you helped a customer with a difficult problem”.
  • Keep each question focused and comfortable to answer aloud. A brief example and its outcome can fit naturally into one question.

The interviewer follows your list, adapting the wording naturally and asking a brief clarification or follow-up when helpful.

HireMike checks changed questions against your job details and shows guidance beneath any that need attention. It also highlights overlapping questions. You can keep editing while checking runs; if a save needs a correction, the page opens AI Interview and takes you to the first issue. Choose Retry if checking is temporarily unavailable. Your edits stay in place and checks do not charge your wallet.

An AI-mode job needs at least one reviewed question before publishing or trying the interview. You can save an incomplete draft without questions and come back to it later. If an older job has more than five questions, choose the five you’d like to keep before updating the set.

On a human-led job, the editor is hidden because you run the conversation yourself. Any saved questions stay ready if you return to AI mode.

Questions remain editable after publishing. New interview sessions use the latest saved list; interviews already underway keep their original plan.

Before you publish

Check the saved configuration, not only the applicant preview:

  • Read every knockout question and its Required answer to continue. One wrong answer excludes the candidate automatically.
  • Give each scoring criterion a distinct purpose and choose its importance. If AI reads CVs, the evidence must be something a CV can contain.
  • For AI interviews, save one to five clear main questions. Use Try this interview to hear the saved version.
  • Choose AI or manual CV review, and any invitation hold or review deadline, under CV Screening.
  • Check AI and human booking notices under AI Interview → Booking notice. Your calendar is needed only for interviews you run yourself.

Checking questions and criteria does not save your edits. Use Save draft, then publish when the checks pass. See Publishing & job settings.

What's next

Your draft has content — now choose how interviews will run, review the remaining settings, and publish. That's the next guide: Publishing & job settings.


Related: Publishing & job settings · CV screening · The AI interview